Startup / Operation - BOMANN VS 2195 Bedienungsanleitung, Garantie

NOTE NOTE NOTE NOTE: : : :
• Ask another person to assist.
You possibly need:
screw wrench, Phillips screw-
•
driver as well as a thin-blade screwdriver.
• Loosen the screws on the appliance back and
remove the appliance cover.
• Dismount the upper door hinge and the screws
(s). Lift the appliance door and set it safely aside.
• Tilt the appliance slightly backwards and block it
in this position. Unscrew the feet and disassemble
the lower door hinge.
• Transfer and attach the lower door hinge to the
opposite appliance side. Screw in the feet accord-
ingly.
• Put the appliance back in the upright position.
Put on the appliance door and fix it its intended
position.
• Transfer and attach the upper door hinge to the
opposite appliance side after unscrewing the
hinge pin and inserting it into the adjacent hole.
Screw in the screws (s) on the opposite side.
• Replace the appliance cover and fix it.
All manuals and user guides at all-guides.com
Check that the door is optimally aligned both vertical-
ly and horizontally to ensure a smooth opening and
closing of the door.
Prior to first use Prior to first use Prior to first use Prior to first use
After transport, the appliance should be left standing
upright for four hours before connecting to the power
supply. Nonobservance could lead to malfunction of
the cooling system and causes an appliance break-
down.
Clean the appliance interior including all accessory
parts. Consider the instructions which we provide in
the chapter "Cleaning and Maintenance".
Starting the appliance Starting the appliance Starting the appliance Starting the appliance
• Connect the appliance to the power supply.
• Operate the temperature control. See also the
Settings Settings Settings Settings
Setting [ 0 ] means that the appliance is in the off
state. Turn the temperature control clockwise, start-
ing from this setting; the appliance will turn on auto-
matically.
The power levels [ 1 – 7 ] regulate the different val-
ues of the internal temperature.
Setting 0 0 0 0 Setting Setting Setting
Off state
Note that the temperature will change depending on
the ambient temperature, frequency of door opening
and the amount of food in the appliance.
During initial operation, turn the temperature control
to the highest setting first, until the appliance has
18

Startup / Operation

Startup / Operation
Startup / Operation Startup / Operation
CAUTION: : : : CAUTION CAUTION CAUTION
section "Settings".
Setting 1 1 1 1 Setting Setting Setting
Lowest setting
(warmest inside
temperature)
Setting 7 7 7 7 Setting Setting Setting
Highest setting
(coldest inside
temperature)