Sensor Monitor; Messages; Memolog (Memosens Only) - Knick Portavo 908 Multi Betriebsanleitung

12
pH ORP

Sensor Monitor

Shows the raw values available fom the connected sensor:
pH
pH ISFET
ORP
Cond
Oxy
Oxy, optical

Messages

Shows all active error and status messages as well as supplementary help texts.

MemoLog (Memosens only)

Displays the individual calibration records stored in the device. You have the possibil-
ity to delete individual entries or all entries. The following parameters are displayed:
• Sensor type
• Serial no.
• TAG
• Calibration date
• Zero point
• Slope
• Cell constant (Cond sensor)
• Operating point (ISFET sensor)
Background: The device provides a calibration data logger, which must be activated
in the configuration menu. With "MemoLog" activated, up to 100 calibration records
can be directly saved to the device. After every calibration, the complete Memosens
data will be recorded. Convenient management of the calibration data is possible
using the MemoSuite or Paraly SW 112 software.
MemoLog is not suitable for SE 340 (optical oxygen sensor).
Oxy Cond
mV, temperature, glass impedance
mV, leakage current, temperature
mV, temperature
Resistance, conductance, temperature
Sensor current, leakage current, polarization voltage,
partial pressure, air pressure, temperature
Partial pressure, temperature
Information