Sensor Network Diagram (Ph And Oxy Only) - Knick Portavo 908 Multi Betriebsanleitung

Information
11
pH Oxy

Sensor Network Diagram (pH and Oxy only)

Provides single-glance information on the following parameters of the connected
sensor:
• Slope
• Zero point (operating point for Memosens ISFET)
• Sensocheck (pH) or leakage current (ISFET and Oxy)
• Response time
• Calibration timer
• Wear (Memosens)
Parameters which cannot be checked are shown as inactive (gray) and are set to
100 %.
The parameter values should lie between the outer (100 %) and inner (50 %) hexa-
gon. When a value enters the inner hexagon (< 50 %), the corresponding caption
text flashes red (see example).
Example: Network diagram of a digital pH sensor (Memosens)
Network diagram
Slope Zero point
pH
Wear Sensocheck
Cal timer Response time
Help
Return