Knick Portavo 908 Multi Betriebsanleitung Seite 47

Options
User Management (Access Control)
You can create up to 4 users with different access rights for configuration or calibra-
tion.
Enabling the User Management
1) In measuring mode, press the Menu softkey.
2) Select "Configuration" and confirm by pressing enter.
3) Select "User management" / "Management – Enable".
4) Select
User = ADMIN
PIN code = 1989 (factory setting)
5) Press enter.
6) To create more users / assign more PIN codes: Press Continue softkey.
Creating a User / Changing the PIN Code
1. Select a user (e.g., "User 1", default: ADMIN, PIN code 1989):
Configuration
Management – Disable
+ User 1
+ User 2
+ User 3
+ User 4
Return
2. Select ADMIN to open the editor for entering the user name:
Configuration
Management – Disable
- User 1
ADMIN
PIN code 1989
cal level Access
conf level Access
Return
NOTICE!
If you lose the PIN code for the ADMIN user, the system access will be blocked.
The manufacturer can generate a rescue PIN code.
enter
Continue
enter
Continue
pH ORP
Configuration
Management – Disable
- User 1
ADMIN
PIN code 1989
cal level Access
conf level Access
Return
Configuration
End
ADMIN |
1 2 3 4 5 6 7 8 9 0 ? `
Q W E R T Z U I O P
A S D F G H J K L
> Y X C V B N M ;
abc
47
Oxy Cond
You can allow or
block access to
configuration or
calibration for
each user.
Continue
*
'
: _
Finish