Oxygen Configuration - Knick Portavo 908 Multi Betriebsanleitung

Configuration

Oxygen Configuration

1) In measuring mode, press the Menu softkey.
2) Select "Configuration" and confirm by pressing enter.
3) Make the desired adjustments.
The following table gives you an overview.
Factory settings are shown in bold print.
"Oxygen Configuration" menu selection – part 1
Language
Auto-off
Temperature
Right softkey
+ Oxy sensor
Display
Salinity
Pressure correc-
tion
**
Pressure
Wear
+ Calibration
Cal mode
Calibration
timer
Interval
MemoLog
TAG
+ Time/Date
Time format
Date format
Time
Date
* "+" indicates that submenus can be opened by pressing enter.
** The device provides an internal barometer.
Deutsch | English | Español | Italiano | Français |
Português | Русский
Off | 5 min | 10 min | 30 min | 60 min
°C | °F
Logger Start/Stop | Hold value | Print
*
Saturation | Concentration | Partial pressure
0 ... 45.0 g/kg
Air pressure| Manual
Manual: 0 ... 9999 mbar | 1013 mbar
On | Off
*
In air | Zero point | Data entry
Off | On
On: 0 ... 99 days
Off | On
Off | On
*
24 h | 12 h
dd.mm.yyyy | yyyy-mm-dd | dd/mm/yyyy |
mm/dd/yyyy
hh:mm:ss
Date format as configured
21
Oxy