Setting Mode - IKEA HYGIENISK Bedienungsanleitung

ENGLISH
Acoustic signals sound also when
a malfunction of the appliance
occurs. It is not possible to
deactivate these signals.
AutoOpen
AutoOpen improves the drying results with
less energy consumption. The appliance
door opens automatically during the drying
phase and remains ajar.
AutoOpen is automatically activated with all
programmes other than Rinse & Hold.
Caution! Do not try to close the
appliance door within 2 minutes
after automatic opening. This can
cause damage to the appliance.
Caution! If children, pets or
people with disabilities have
access to the appliance,
deactivate AutoOpen. The
automatic opening of the door
may pose a danger and expose
possible hazards inside the
appliance (such as knives, sharp
objects, chemicals).
Key tones
The buttons on the control panel make a
click sound when you press them. You can
deactivate this sound.
Latest programme selection
You can set the automatic selection of the
most recently used programme and options.
The latest programme that was completed
before the appliance deactivation is saved. It
is then selected automatically after you
activate the appliance.
When the latest programme selection is
disabled, the default programme is ECO.
TimeBeam
TimeBeam displays the following
information on the floor below the appliance
door:
• The programme duration when the
programme begins.
• 0:00 and CLEAN when the programme is
complete.
• DELAY and the countdown duration when
the delay start begins.
• An alarm code when the appliance has a
malfunction.
When AutoOpen opens the door,
TimeBeam is off. To check the
remaining time of the running
programme, look at the control
panel display.

Setting mode

How to enter setting mode
You can enter setting mode before starting a
programme. You cannot enter setting mode
while the programme is running.
15