Test Strip; Water Hardness Table; Water Softener System; Setting - IKEA TILLREDA AA-2326089-2 Bedienungsanleitung

4.4. Test Strip

Run water
Keep the
through
strip in the
the tap
water (1sec)
(1min.)
NOTE: The level is set to 3 as default. If the water is well water or has a hardness level
above 90 dF, we recommend that you use filter and refinement devices.

4.5. Water Hardness Table

Level German dH
1 0-5
2 6-11
3 12-17
4 18-22
5 23-34
6 35-50

4.6. Water Softener System

The dishwasher is equipped with a water softener which reduces the hardness in the
mains water supply. To find out the hardness level of your tap water, contact your
water company or use a test strip (if available).

4.7. Setting

In order to change the salt level, follow the below steps:
• Open the door of the machine.
• Turn on the machine, and press the Programme button as soon as the machine is
turned on.
• Hold down the Programme button until "SL" disappears.
• The machine will display the last setting.
• Set the level by pressing the Programme button.
• Turn off the machine to save the setting.

4.8. Detergent usage

Only use detergents specifically designed for domestic dishwashers. Keep your
detergents in cool, dry places out of reach of children.
Add the proper detergent for the selected program to ensure the best performance.
The amount of detergent needed depends on the cycle, load size, and soil level of
dishes.
Shake the
strip. (1min.)
French dF British dE
0-9 0-6
10-20 7-14
21-30 15-21
31-40 22-28
41-60 29-42
61-90 43-63
GB - 10
Wait Set the hardness level of
your machine.
1
2
3
4
5
6
Indicator
L1 is shown on the display.
L2 is shown on the display.
L3 is shown on the display.
L4 is shown on the display.
L5 is shown on the display.
L6 is shown on the display.