Setting Mode - IKEA LAGAN AA-2189589-3 Bedienungsanleitung

ENGLISH
AutoOpen is automatically activated with all
programmes other than Rinse & Hold.
Caution! Do not try to close the
appliance door within 2 minutes
after automatic opening. This can
cause damage to the appliance.
Caution! If children, pets or
people with disabilities have
access to the appliance,
deactivate AutoOpen. The
automatic opening of the door
may pose a danger and expose
possible hazards inside the
appliance (such as knives, sharp
objects, chemicals).
Key tones
The buttons on the control panel make a
click sound when you press them. You can
deactivate this sound.

Setting mode

How to enter setting mode
You can enter setting mode before starting a
programme. You cannot enter setting mode
while the programme is running.
To enter setting mode, press and hold
simultaneously
seconds.
• The light related to
indicator
and for about 3
and the
flash.
• The indicators
• The lights related to the programme
buttons are on.
How to navigate in setting mode
You can navigate in setting mode using
programme buttons.
A
A. Previous button
B. OK button
C. Next button
Use Previous and Next to switch between
the basic settings and to change their value.
Use OK to enter the selected setting and to
confirm changing its value.
How to change a setting
Make sure the appliance is in setting mode.
1. Press Previous or Next until the
indicator dedicated to the desired setting
flashes.
The light related to
setting value:
• For the settings with two values (on
and off), the light is either on (= the
setting is on) or off (= the setting is
off).
• For the settings with multiple values
(levels), the light flashes. The number
of flashes indicates the current
setting value (e.g. 5 flashes + pause
+ 5 flashes... = level 5).
2. Press OK to enter the setting.
• The indicator related to the setting is
on.
• The other indicators are off.
• The light related to
current setting value.
, and are on.
B C
indicates the current
indicates the
14