Removing The Loudspeaker - Fujitsu FUTRO S900 Bedienungsanleitung

28 - English

Removing the loudspeaker

Loudspeaker
► Open the housing (see
► If a PCI or PCIe board is installed, remove the cross piece and PCI or PCIe
board (see "Removing the board", Page 38 -
► Disconnect the loudspeaker cable from the mainboard (1).
► Undo the screws (2).
► Lift the loudspeaker out of the housing.
► Reinstall the cross piece and the PCI or PCIe board if necessary (see
"Installing the board", Page 36 -
► Close the housing (see
70
"Opening the casing", Page 20 -
1
English).
"Closing the casing", Page 21 -
English).
English).
2
2
English).
Fujitsu Technology Solutions
System expansions