Fujitsu FUTRO S900 Bedienungsanleitung Seite 78

32 - English System expansions
1
2
2
3
► Disconnect the cable of the WLAN module from the mainboard (1).
► Undo the screws (2).
► Pull the WLAN module in the direction of the arrow (3) out of the slot and lift it out of the casing.
► Reinstall the cross piece and the PCI or PCIe board if necessary (see
"Installing the board", Page 36 - English).
► Close the casing (see "Closing the casing", Page 21 - English).
Ensure that cables are not trapped between the casing and the components.
74 Fujitsu Technology Solutions