Fujitsu FUTRO S900 Bedienungsanleitung Seite 80

34 - English
► Place the Power over Ethernet module in the casing with the component side
facing upwards (2). Ensure that it engages in the slot.
► Secure the Power over Ethernet module with the screws (1).
► Reinstall the cross piece and the PCI or PCIe board if necessary (see
"Installing the board", Page 36 -
► Close the casing (see
Make sure that the cables are not trapped between the casing and the components.
76
1
English).
"Closing the casing", Page 21 -
System expansions
1
English).
Fujitsu Technology Solutions