Turning The Power On And Off; Adjusting The Sound's Volume And Brilliance; About The Pedals - Roland HP107e Bedienungsanleitung

Turning the Power On and
Off
Turn on power to your various devices in the order specified.
By turning on devices in the wrong order, you risk causing
malfunction and/or damage to speakers and other devices.
To turn the power on, turn the [Volume] knob all
the way down, and then press the [Power On]
switch.
Power On
Power Indicator
The power will turn on, and the Power indicator at the
left front of the HP107e will light.
After a few seconds, you will be able to play the keyboard
to produce sound. Use the [Volume] knob to adjust the
volume.
This unit is equipped with a protection circuit. A brief
NOTE
interval (a few seconds) after power up is required before
the unit will operate normally.
To turn the power off, turn the [Volume] knob all
the way to the left, and press the [Power On]
switch.
The Power indicator at the left front of the HP107e will go
dark, and the power will be turned off.
If you need to turn off the power completely, first turn off
NOTE
the POWER switch, then unplug the power cord from
the power outlet. Refer to "Power Supply" (p. 4).
Adjusting the Sound's
Volume and Brilliance
Turn the [Volume] knob to adjust the overall vol-
ume.
Turn the [Brilliance] knob to adjust the brightness
of the sound.
Min Max Mellow
Bright

About the Pedals

The pedals have the following functions, and are used
mainly for piano performance.
Soft Pedal
Sostenuto Pedal
Damper pedal (right pedal)
While this pedal is pressed, notes will be sustained even
after you take your fingers off the keys.
The length of sustain will change subtly depending on
how deeply you press the pedal.
On an acoustic piano, holding down the damper pedal
will allow the remaining strings to resonate in sympathy
with the sounds that you played from the keyboard, add-
ing a rich resonance. The HP107e simulates this sympa-
thetic resonance.
You can change the amount of resonance applied with
the damper pedal (p. 15).
Sostenuto pedal (center pedal)
This pedal sustains only the sounds of the keys that were
already played when you pressed the pedal.
You can switch the function of the sostenuto pedal ( p.
21).
Soft pedal (left pedal)
When you hold down this pedal and play the keyboard,
the sound will have a softer tone.
The softness of the tone can be varied subtly by the depth
to which you press the pedal.
About the adjuster
Be sure to use the adjusters underneath the pedals when-
ever the instrument is moved or when the pedals appear
to be unstable.
❍ Rotate the adjuster to lower it so that it is in firm contact
with the floor. If there is a gap between the pedals and
the floor, the pedals may be damaged. In particular when
placing the instrument on carpet, adjust this so that the
pedals firmly contact the floor.
Before You Start Playing
Damper Pedal
Adjuster
11