Operation; Operating The Appliance; Processing Meat - Silvercrest SFW 250 A1 Bedienungsanleitung

• First place the plastic disc and then the metal
disc of the biscuit attachment
t
grinder casing (see fold-out side).
Position the biscuit attachment
indentations on the biscuit attachment
the fixing points in the meat grinder casing
• When everything has been correctly assembled,
screw the ring clamp
• Re-attach the pattern strips
the biscuit attachment
q
the pattern strips
appliance. If it does not, you will not be able to
adjust the pattern, which is located directly on
the grip.
• Assemble the meat grinder casing
under a).
• To dismantle it, you must first remove the pattern
q
strips before you can screw open the ring
a
clamp and take the biscuit attachment

6. Operation

Important!:
Do not use the appliance for longer than 15 minutes
continuously. To avoid an overheating of the app-
liance, after such a period switch it off and allow it
to cool down for ca. 30 minutes.
Important!:
NEVER activate the buttons ON or REV, with a
change of rotation direction, if the appliance motor
has not come to a complete stop. This could
damage the motor.
Warning:
NEVER open the housing of the motor block
does not contain any user-serviceable elements. If
the housing is opened, the warranty becomes void.
If the housing is opened, there is a risk of receiving
a potentially fatal electric shock.
q
into the meat
q
so that the
q
lie on
a
on until it is handtight.
q
to the front part of
q
. Ensure that the grip on
points away from the
t
as described
q
r
a) Operating the appliance
Once the appropriate attachments have been fixed:
• Place the appliance where it will at all times be
absolutely stable and under no circumstances
could it fall off of the work surface or in any way
t
. come into contact with water (due to vibrations
or becoming snagged in the power cable). Vi-
bration is unavoidable when it is working.
Warning:
Never touch a machine, which is plugged in or is
operational when it happens to fall or land in water
– or in the case of other emergencies! First unplug
the appliance in all emergency situations! Otherwise
one runs the risk of serious injury or loss of life!
• Place the food to be processed into the feed tray
e
and position a container under the exit ope-
out. ning to collect the processed food.
• First press the OFF button to check that the appli-
ance is still switched off. Otherwise there is a risk
that the appliance could unintentionally start
when the plug is inserted into the power socket.
• Then put the plug into the socket.
• Press the button ON to start the appliance.
Important!:
Now push the foodstuff into the feeding shaft ONLY
with the round stodger
forks, spoonhandles or similar objects. This could
lead to injury and also damage the appliance.
Important!:
Do not ever press so hard that the motor gets audibly
slower. This could overburden the machine under
pressure and damage it.
b) Processing meat
– it
• Use pieces of meat that fit without problem into
the feeding shaft. If needs be, cut the meat up
into smaller pieces. Check that the meat does not
have any bones and or tendons.
- 35 -
w
– NEVER with one's fingers,