Operation; Operating The Appliance; B) Processing Meat - Silvercrest KH 3462 Bedienungsanleitung

• First place the plastic disc and then the metal
disc of the biscuit attachment
t
grinder casing (see fold-out side).
Position the biscuit attachment
indentations on the biscuit attachment
the fixing points in the meat grinder casing
• When everything has been correctly assembled,
screw the ring clamp
• Re-attach the pattern strips
the biscuit attachment
q
the pattern strips
appliance. If it does not, you will not be able to
adjust the pattern, which is located directly on
the grip.
• Assemble the meat grinder casing
under a).
• To dismantle it, you must first remove the pattern
strips q before you can screw open the ring
a
clamp and take the biscuit attachment

6. Operation

Important!:
Do not use the appliance for longer than 15 minutes
continuously. To avoid an overheating of the app-
liance, after such a period switch it off and allow it
to cool down for ca. 30 minutes.
Important!:
NEVER activate the buttons ON or REV, with a
change of rotation direction, if the appliance motor
has not come to a complete stop. This could
damage the motor.
q into the meat
q
so that the
q
lie on
t
a
on until it is handtight.
q
to the front part of
q
. Ensure that the grip on
points away from the
t
as described
q
out.
a) Operating the appliance
Once the appropriate attachments have been fixed:
• Place the appliance where it will at all times be
absolutely stable and under no circumstances
could it fall off of the work surface or in any way
. come into contact with water (due to vibrations
or becoming snagged in the power cable). Vi-
bration is unavoidable when it is working.
Warning:
Never touch a machine, which is plugged in or is
operational when it happens to fall or land in water
– or in the case of other emergencies! First unplug
the appliance in all emergency situations! Otherwise
one runs the risk of serious injury or loss of life!
• Place the food to be processed into the feed tray
e and position a container under the exit ope-
ning to collect the processed food.
• First press the OFF button to check that the appli-
ance is still switched off. Otherwise there is a risk
that the appliance could unintentionally start
when the plug is inserted into the power socket.
• Then put the plug into the socket.
• Press the button ON to start the appliance.
• Now push in the food into the feeding shaft with
the round stodger
forks, spoons or similar object. This could lead to
injury and also damage the appliance.
Important!:
Do not ever press so hard that the motor gets audibly
slower. This could overburden the machine under
pressure and damage it.

b) Processing meat

• Only use meat pieces which are not larger than
2 cm. Check that the meat does not have any
bones and or tendons.
- 35 -
w
– NEVER with one's fingers,