Pilz PSEN cs1.13p ATEX Bedienungsanleitung Seite 44

PSEN cs1.13p ATEX
Semiconductor outputs
Short circuit-proof
Residual current at outputs
Voltage drop at OSSDs
Lowest operating current
Utilisation category in accordance with EN 60947-1
Times
Test pulse duration, safety outputs
Switch-on delay
after UB is applied
Inputs typ.
Inputs max.
Actuator typ.
Actuator max.
Delay-on de-energisation
Inputs typ.
Inputs max.
Actuator typ.
Actuator max.
Risk time in accordance with EN 60947-5-3
Supply interruption before de-energisation
Simultaneity, channel 1 and 2
Environmental data
ATEX approval
ATEX category, gas
ATEX category, dust
Application area
Ambient temperature
In accordance with the standard
Temperature range
Storage temperature
In accordance with the standard
Climatic suitability
In accordance with the standard
Humidity
EMC
Vibration
In accordance with the standard
Frequency
Amplitude
Shock stress
In accordance with the standard
Acceleration
Duration
Operating Manual PSEN cs1.13p ATEX
21097-2EN-13
Yes
10 µA
3,5 V
0 mA
DC-12
450 µs
1 s
13 ms
20 ms
45 ms
100 ms
15 ms
20 ms
30 ms
260 ms
260 ms
20 ms
∞
SEV 12 ATEX 0122 X
II 3G Ex mc nAc IIC T6
II 3D Ex mc tc IIIC T80°C IP67
X: -25°C ≤ ta ≤ +50°C
EN 60068-2-14
-25 - 50 °C
EN 60068-2-1/-2
EN 60068-2-78
93 % r. h. at 40 °C
EN 60947-5-3
EN 60947-5-2
10 - 55 Hz
1 mm
EN 60947-5-2
30g
11 ms
44