1. INTRODUCTION
SAPHIR fan coil units are the result of an exhaustive research on functionality and comfort,
realized in the YORK laboratories.
Thanks to their pleasant design, the reduced dimensions and the high coefficient of
performance, these units of new conception are able to satisfy all the requests of comfort,
space optimization and aesthetic needs.
Thank you for the trust you have shown in choosing an YORK fan coil unit.
2. PURPOSES OF THIS MANUAL
Before installing the fan coil unit, carefully read the instructions contained in
this manual. By doing so, you will obtain the following advantages:
•
correct installation
•
the optimum configuration for the specific use of the unit
•
complete knowledge of the unit
3. APPLICABILITY OF THIS MANUAL
The following models are dealt with in this manual:
MODEL
INSTALLATION
YSF
FLOOR UNIT (WITH FEET)
YSW
WALL UNIT
YSIV - YSIV/AF
VERTICAL CONCEALED UNIT
YSIH - YSIH/AF
HORIZONTAL CONCEALED UNIT
4. DESCRIPTION OF THE FAN COIL UNITS
The SAPHIR fan coils are units for COOLING and HEATING applications; they are fed with
cold and hot water and used according to their relevant performance features.
Fan coil units are components of the cooling and/or heating system; consequently, they
are without any safety devices on the water circuit. These units have been designed for
temperatures until 85 °C.
4.1 COMPONENTS
To identify the components in the fan coil you have purchased, see the exploded drawings
SIZE
20-40
20-40
20-40
20-40
EN
1
2
3
4
5
6
7
8
9
10
+
23