Herunterladen Inhalt Inhalt Diese Seite drucken

10 Vacuum Packing In Magic Vac; Family Containers; Vacuum Packing Glass Jars; Vacuum Packing With - Magic Vac Vantage Betriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 37
Warning: DO NOT LEAVE THE LID WITH LOCKS ENGAGED WHEN THE UNIT IS NOT IN USE.
- Fill the container leaving at least 3 cm of room
between the contents and upper rim and position
the lid on the container. Turn the knob to the
"VACUUM" position". (fig. P)
- Connect the container lid knob to the appliance air
inlet (9) by means of the connection hose (19). (fig.
Q)
- Lock the lid (7) by pushing the LOCK buttons (10); the
machine will carry out a vacuum packing cycle and
turn off automatically on its completion.
- Remove the hose from the container lid knob.
- Turn the knob to the "CLOSED" position.
- To open the containers turn the knob to the "OPEN"
position; you should hear a hissing of air as it enters
the container. This sound guarantees that the con-
tents have been packed in a vacuum.

10 Vacuum packing in MAGIC VAC

Multipurpose containers ideal for storage of frequently
used products such as dry and fragile foods; powder
foodstuffs; fresh, pureed or strained fruit and vege-
tables. Their transparency and design makes them
attractive to display on kitchen shelves while ensuring
that their contents are clearly visible.
- Fill the container leaving at least 3 cm of room
between the contents and upper rim and position
the lid on the container.
- Connect the container lid knob to the unit air outlet
port (9) by means of the connection tube (19) (fig. R).
- Lock the lid (7) by pushing the LOCK buttons (10); the
machine will carry out a vacuum packing cycle and
turn off automatically on its completion.
- Remove the hose from the container lid.
- Press the central button (20) to open the containers
(fig. R).
11 Vacuum packing in glass jars sealed with metal
caps (Leifheit type)
Use the large-sized cap attachment to pack foods in
large-mouthed glass jars with a metal cap. A small-
sized cap attachment is also available for narrow-
mouthed jars sealed with metal caps.
- Fill the container leaving at least 3 cm of room
between the contents and upper rim.
- Connect the cap attachment (21) to the air inlet (9) of
the appliance by means of the connection hose (19).
Place the cap attachment directly on the jar with the
metal cap only (22) and press down, making sure it
fits correctly (fig. S).
- Lock the lid (7) by pushing the LOCK buttons (10);
the machine will carry out a vacuum packing cycle
and turn off automatically on its completion. Make
sure that the cap attachment holds firmly, keeping it
pressed with the your hand.
- Disconnect the hose from the cap attachment.
Remove the cap attachment from the jar.
- Apply the ring (23) supplied with the jar and screw it
down all the way (fig. S).
- To open a glass jar vacuum-sealed with a metal cap,
use the cap opener provided (the side with writing
OPERATING INSTRUCTIONS

Family containers

®
17
should be turned up). Position the cap opener as
shown in figure T and gently pry open the cap until
the vacuum is released. Remove the metal cap. This
accessory allows you to reuse the cap.
12 Vacuum packing with MAGIC VAC bottle caps
The MAGIC VAC
Bottle Cap may be used to seal partly
®
filled bottles of wine or non-fizzy beverages. Using the
Bottle Cap will allow you to create a vacuum inside the
bottle so as to slow down oxidisation and preserve the
freshness and flavour of its contents for a longer time.
- By means of the connection hose (19) connect the
air inlet (9) of the appliance to the MAGIC VAC
Bottle Cap (24) (fig. U). Press the Cap firmly into the
bottle.
- Lock the lid (7) by pushing the LOCK buttons (10); the
machine will carry out a vacuum packing cycle and
turn off automatically on its completion.
- Disconnect the hose from both the Bottle Cap and
the appliance immediately.
- To open a bottle sealed with the MAGIC VAC
Cap, simply pull the cap out of the bottle. You will
hear the air rushing into the bottle.
13 Vacuum packing with Cap Attachment in MAGIC
VAC
Executive or in containers sealed with MAGIC
®
VAC
Universal Caps with the previous model of
®
knob
To use the Cap Attachment in MAGIC VAC
containers or in containers sealed with MAGIC
VAC
®
Universal Caps with the previous model of
knob, read the instructions supplied in our web page
www.flaemnuova.it
®
®
®
Bottle
®
Executive

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis