Switching On The Dishwasher; Selecting A Programme - Miele PFD 101 Kurzgebrauchsanweisung

Switching on the dishwasher

 Make sure the spray arms can rotate
freely.
 Close the door.
 Open the stopcock, if it is closed.
 Touch the  sensor control.
If the dishwasher has been switched
off for longer than 1 minute, you will
need to hold the  sensor control for
a bit longer (wipe protection).
The  ECO programme will appear
briefly in the display and the appropri-
ate sensor control will be illuminated.
Next, the estimated energy and water
consumption may be shown for the
chosen programme for several
seconds.
Then the display will show the estim-
ated duration for the selected pro-
gramme.
The Start sensor control flashes.

Selecting a programme

Choose your programme according to
the type of crockery and the degree of
soiling.
The different programmes and their
uses are described in the "Programme
chart" later on in this booklet.
 Touch the sensor control for the pro-
gramme you want.
The sensor control for the selected pro-
gramme will light up.
You can now select programme op-
tions.
If any programme options are selected,
the appropriate sensor controls will also
light up.
en - Operation
45