Opening The Door - Miele PFD 101 Kurzgebrauchsanweisung

en - Before using for the first time
____________ °dH
The dishwasher is programmed at the
factory for a water hardness level of
2.5 mmol/l (14 °dH – German scale).
 Set the water hardness level in your
area and confirm using OK.
Prompts will then appear in the display.
After confirming these prompts with
OK, the messages 

Refill rinse aid may appear.
 Add salt and rinse aid if necessary
(see the "Dishwasher salt" and "Rinse
aid" sections in the "Before using for
the first time" chapter).
 Select OK to confirm the messages.
The programme selected will appear
briefly in the display and the appropri-
ate sensor control will be illuminated.
Next, the estimated water consumption
may be shown for the chosen pro-
gramme for several seconds.
Then the display will show the estim-
ated running time for the programme
selected.

Opening the door

In some programmes, the door auto-
matically opens slightly to assist the
drying process.
This function can be deactivated if you
wish.
40
Refill salt and
 To open the door, reach under the re-
cessed grip and pull the handle.
 Open the door fully to disengage the
locking mechanism.
At the end of the programme, if the
AutoOpen function is on, the door lock-
ing pins automatically retract.
To prevent a technical fault, do not
hold the door locking pins firmly
when they are retracting.
If the door is opened during operation
all wash functions are automatically in-
terrupted.