Citrus Press; Service & Customer Care - Kenwood FP630 serie Handbuch

citrus press

Use the citrus press to squeeze the juice from citrus fruits (eg
oranges, lemons, limes and grapefruits).
cone
sieve
to use the citrus press
1 Fit the drive shaft and bowl onto the power unit.
2 Add the sieve and turn clockwise until the interlock fin on the
sieve aligns with the line on the power unit
3 Place the cone over the drive shaft turning until it drops all the
way down .
4 Cut the fruit in half. Then switch on and press the fruit onto the
cone.
The citrus press will not operate if the sieve is not
●
locked correctly.
mill
Use the mill for milling herbs, nuts and coffee beans.
blade unit
sealing ring
jar
sprinkler lid
safety
Never fit the blade unit to your machine without the jar fitted.
●
Never unscrew the jar while the multi-mill is fitted to your
●
machine.
Don't touch the sharp blades. Keep the blade unit away from
●
children.
Never remove the multi-mill until the blades have completely
●
stopped.
important
To ensure long life of your mill, never run for longer than 30
●
seconds. Switch off as soon as you've got the right consistency.
Don't process spices - they may damage the plastic.
●
The machine won't work if the mill is fitted incorrectly.
●
Use for dry ingredients only.
●
to use your mill
1 Put your ingredients into the jar. Fill it no more than half full.
2 Fit the sealing ring into the blade unit.
3 Turn the blade unit upside down. Lower it into the jar, blades
down.
4 Screw the blade unit onto the jar until it is finger tight.
5 Lift off the liquidiser outlet cover
6 Place the mill on the liquidiser outlet and turn to lock in a
clockwise direction .
7 Switch on to maximum speed or use the pulse control.
8 After milling, you can replace the blade unit with the sprinkler lid
and shake out your food.
The sprinkler lid is not airtight.
●
hints
Herbs are best milled when clean and dry.
●
.
.
KENSTORE™ attachments carousel
Your food processor is supplied with an attachment storage
carousel that fits inside the bowl.
to use the storage carousel
1 Fit the knife blade to the bowl.
2 Then fit the whisk, discs and canopy into the carousel
3 Fit the carousel over the knife blade and place the processor lid
on top
care & cleaning
Always switch off and unplug before cleaning.
●
Handle the blades and cutting discs with care - they are
●
extremely sharp.
Some foods may discolour the plastic. This is perfectly normal
●
and won't harm the plastic or affect the flavour of your food. Rub
with a cloth dipped in vegetable oil to remove the discolouration.
power unit
Wipe with a damp cloth, then dry. Ensure that the interlock area
●
is clear of food debris.
Wrap excess cord around the bracket at the back of the
●
appliance.
liquidiser/mill
1 Empty the jug/jar before unscrewing it from the blade unit.
2 Wash the jug/jar by hand.
3 Remove and wash the sealing ring.
4 Don't touch the sharp blades - brush them clean using hot
soapy water, then rinse thoroughly under the tap. Don't
immerse the blade unit in water.
5 Leave to dry upside down.
twin beater geared whisk
Detach the beaters from the drive head by gently pulling them
●
free. Wash in warm soapy water.
Wipe the drive head with a damp cloth, then dry. Do not
●
immerse the drive head in water.
all other parts
Wash by hand, then dry.
●
Alternatively they can be washed on the top rack of your
●
dishwasher. A short low temperature programme is
recommended.
service & customer care
If the cord is damaged it must, for safety reasons, be replaced
●
by Kenwood or an authorised Kenwood repairer.
If you experience any problems with the operation of
●
the processor, before calling for assistance refer to
the troubleshooting guide.
If you need help with:
Using your machine
●
Servicing or repairs
●
Contact the shop where you brought the food processor.
Designed and engineered by Kenwood in the UK.
●
Made in China.
●
6
.