Citrus Press - Kenwood Multipro FP910 series Bedienungsanleitungen

maxi-blend canopy
When blending liquids, use the maxi-blend canopy with the
knife blade. It allows you to increase the liquid processing
capacity from 1 litre to 1.5 litres, prevents leaking and
improves the chopping performance of the blade.
1 Fit the drive shaft and bowl onto the
power unit.
2 Fit the knife blade.
3 Add ingredients to be processed.
4 Fit the canopy over the top of the blade ensuring it sits on
the ledge inside the bowl
the canopy, hold by the centre grip.
5 Fit the lid and switch on.
slicing/shredding discs
reversible slicing/shredding discs - thick
thin
Use the shredding side for cheese, carrots, potatoes and
foods of a similar texture.
Use the slicing side for cheese, carrots, potatoes, cabbage,
cucumber, courgette, beetroot and onions.
fine (Julienne style) chipper disc
Use to cut: potatoes for Julienne style French fries; firm
ingredients for salads, garnishes, casseroles and stir fries (eg
carrot, swede, courgette, cucumber).
rasping disc
Grates Parmesan cheese and potatoes for German potato
dumplings.
safety
Never remove the lid until the cutting disc has
●
completely stopped.
Handle the cutting discs with care - they are
●
extremely sharp
to use the cutting discs
1 Fit the drive shaft and bowl onto the power unit.
2 Holding by the centre grip
shaft with the appropriate side uppermost
3 Fit the lid.
4 Choose which size feed tube you want to use. The pusher
contains a smaller feed tube for processing individual items
or thin ingredients.
To use the small feed tube - first put the large pusher inside
the feed tube.
To use the large feed tube - use both pushers together.
5 Put the food in the feed tube.
6 Switch on and push down evenly with the pusher - never
put your fingers in the feed tube.
hints
Use fresh ingredients
●
Don't cut food too small. Fill the width of the large feed tube
●
fairly full. This prevents the food from slipping sideways
during processing. Alternatively use the small feed tube.
When using the chipper disc, place ingredients horizontally.
●
When slicing or shredding: food placed upright
●
out shorter than food placed horizontally
There will always be a small amount of waste on the plate or
●
in the bowl after processing.
. Do not push down on
,
, place the disc onto the drive
.
comes
.

citrus press

Use the citrus press to squeeze the juice from citrus fruits
(eg oranges, lemons, limes and grapefruits).
cone
sieve
to use the citrus press
1 Fit the drive shaft and bowl onto the power unit.
2 Fit the sieve into the bowl - ensuring the sieve handle is
locked into position directly over the bowl handle
3 Place the cone over the drive shaft turning until it drops all
the way down .
4 Cut the fruit in half. Then switch on and press the fruit onto
the cone.
The citrus press will not operate if the sieve is
●
not locked correctly.
mini processor bowl
Use the mini processor bowl to chop herbs and process
small quantities of ingredients e.g. meat, onion, nuts,
mayonnaise, vegetables, purées, sauces and baby food.
mini processor knife blade
mini processor bowl
to use the mini processor bowl
1 Fit the drive shaft and bowl onto the power unit.
2 Fit the mini processor bowl - ensuring the ribs on the inside
of the mini bowl chimney align with the slots in the main
bowl chimney .
3 Place the knife blade over the drive shaft
4 Add the ingredients to be processed.
5 Fit the lid and switch on.
safety
Never remove the lid until the knife blade has completely
●
stopped.
The knife blade is very sharp - always handle with care.
●
important
Don't process spices – they may damage the plastic.
●
Don't process hard food such as coffee beans, ice cubes or
●
chocolate – they may damage the blade.
hints
Herbs are best chopped when clean and dry.
●
Always add a little liquid when blending cooked ingredients
●
to make baby food.
Cut foods such as meat, bread, vegetables into cubes
●
approximately 1-2 cm (
When making mayonnaise add the oil down the feed tube.
●
6
.
⁄ – ⁄ in) before processing.
1 3
2 4
.