Water Connection - Atag VA63211VT Benutzerinformation

4
• This appliance complies with the E.E.C.
Directives.
• Only for UK and Ireland. The appliance
has a 13 amp mains plug. If it is
necessary to change the fuse in the
mains plug, use fuse: 13 amp ASTA (BS
1362).

Water connection

• Make sure not to cause damage to the
water hoses.
• Before you connect the appliance to
new pipes or pipes not used for a long
time, let the water flow until it is clean.
• The first time you use the appliance,
make sure that there is no leakage.
• The water inlet hose has a safety valve
and a sheath with an inner mains cable.
WARNING! Dangerous
voltage.
• If the water inlet hose is damaged,
immediately disconnect the mains plug
All manuals and user guides at all-guides.com
Use
• Do not sit or stand on the open door.
• Dishwasher detergents are dangerous.
• Do not drink and play with the water in
• Do not remove the dishes from the
• The appliance can release hot steam if
• Do not put flammable products or items
Disposal
• Disconnect the appliance from the mains
• Cut off the mains cable and discard it.
• Remove the door catch to prevent
from the mains socket. Contact the
Authorised Service Centre to replace the
water inlet hose.
Obey the safety instructions on the
detergent packaging.
the appliance.
appliance until the programme is
completed. There can be detergent on
the dishes.
you open the door while a programme
operates.
that are wet with flammable products in,
near or on the appliance.
WARNING! Risk of injury or
suffocation.
supply.
children and pets to get closed in the
appliance.