External Cleaning; Internal Cleaning - Atag VA63211VT Benutzerinformation

18
CAUTION! An incorrect position
of the filters can cause bad
washing results and damage to
the appliance.
Cleaning the upper spray arm
We recommend to clean regularly the upper
spray arm to avoid soil to clog the holes.
Clogged holes can cause unsatisfactory
washing results.
1. Pull out the upper basket.
2. To disengage the spray arm from the
basket, press the spray arm upwards in
the direction indicated by the lower
arrow and simultaneously turn it
clockwise.
3. Wash the spray arm under running
water. Use a thin pointed tool, e.g.
toothpick, to remove particles of soil
from the holes.
All manuals and user guides at all-guides.com
4. To engage again the spray arm to the

External cleaning

• Clean the appliance with a moist soft
• Only use neutral detergents.
• Do not use abrasive products, abrasive

Internal cleaning

• Carefully clean the appliance, including
• If you regularly use short duration
• To maintain the performance of your
basket, press the spray arm upwards in
the direction indicated by the lower
arrow and simultaneously turn it
counterclockwise until it locks into
place.
cloth.
cleaning pads or solvents.
the rubber gasket of the door, with a soft
damp cloth.
programmes, these can leave deposits
of grease and limescale inside the
appliance. To prevent this, we
recommend to run long duration
programmes at least 2 times per month.
appliance at its best, we recommend to
use monthly a specific cleaning product
for dishwashers. Follow carefully the
instructions on the packaging of the
product.