Connecting The Oven - hanseatic 65M90E0-E11A99G Gebrauchsanleitung

Preparation
– Veneers or plastic coverings on the built-in
furniture require heat-resistant adhesive (100
°C). If the adhesive and surfaces are not
heat-resistant, the covering may warp and
come loose.
– An intermediate shelf is required if a drawer
is to be installed below the oven.
– The installation recess must have the follow-
ing minimum dimensions:
Installation in an upright cabinet
GB-12
Built-in oven 65M90E0-E11A99G
Installation under a worktop
5 7 0
All dimensions in mm

Connecting the oven

Depending on the installation recess, the oven
must be connected before or after installation.
– For the electrical connection of the oven, a
professional must install an earthed power
socket with a separate fuse with sufficient
protection (230 V~/50 Hz/16 A).
– The socket must be installed in way that
does not affect the depth of the installation
recess when the oven is plugged in.
– Do not use multi-plugs or extension cables.
1. Switch off the socket for the Oven before in-
stallation. To do this, unscrew and/or switch
off the fuse for the socket.
2. Set all oven switches to zero.
3. Insert the mains plug into the socket.