Installing The Dishwasher - hanseatic WQP8-7736B Gebrauchsanleitung

– The socket must be installed in such a way
that the recess into which the dishwasher
will be fitted is deep enough even when the
plug is plugged in.
– Do not use a multi-socket extension cable,
multi-socket plug, travel adapter, extension
cable or similar.
– We recommend using a pulse-sensitive re-
sidual current device (RCD).
• Connect the mains plug to the socket.
Installation and connection

Installing the dishwasher

NOTICE
Risk of damage!
Selecting the wrong screws can dam-
age the front panel.
Use the screws supplied screws or
■
screws of the same length.
3. To protect the worktop against conden-
sation, affix the enclosed protective film
(e) to the underside of the worktop. This
will help you minimise damage to the
worktop from the outflow of hot steam.
4. Insert the two mounting brackets (g)
into the front slots on the top of the dish-
washer so that you can screw the dish-
washer to the worktop subsequently.
Page EN-25
(e)
(g)