Delivery
(a)
(b)
(c)
(d)
(e)
(g)
(f)
(h)
(j)
(i)
(k)
(l)
(m)
(n)
Delivery
Package contents
(a) Semi integrated dishwasher, 1×
(b) Moulding for adapting to the front
panel, 5×
(c) Lateral end profiles, 2×
(d) Filling funnel for dishwasher salt, 1×
(e) Film to protect the worktop from
condensation, 1×
(f)
Velcro straps to install a front panel, 2×
(g) Mounting bracket for fixing the
dishwasher to the worktop, 2×
(h) Cover caps for drill holes, 2×
(i)
Round-head screw for securing the
dishwasher to the kitchen units, 2×
(j)
Countersunk screws for securing the
dishwasher to the worktop, 2×
(k) Countersunk head screws to install a
front panel, 4×
Countersunk screw for securing
(l)
2 trim strips only, 2×
(m) 3 trim strips only, 2×
(n) 4 to 5 trim strips only, 2×
– Quick guide with programme table
– Drilling template for fitting the front panel
Checking package contents
1. Move the appliance to a suitable place
and unpack it (see „Installation and con-
nection" on page EN-23).
2. Remove all parts of the packaging, plastic
profiles, tape and foam padding.
3. Check that the delivery is complete.
4. Check whether the appliance was dam-
aged during transit.
5. If the delivery is incomplete or the appli-
ance has been damaged during transit,
please contact our service department
(see „Service" on page EN-35).
WARNING!
Never use a damaged appliance.
Page EN-3