Specifications Supplied; Description Of Parts; Technical Data - LIVARNO LUX 1002-W Bedienungs- Und Sicherheitshinweise

illuminating private passageways, garages
or footpaths and for deterring unauthorised
intruders� The outdoor spotlight is intended
solely for use in private households and is
not suitable for commercial use� You should
only use the outdoor spotlight as described
in these instructions for use� Any other use is
considered use other than intended and may
cause property damage or personal injury�
The outdoor spotlight is not a toy� The
manufacturer or retailer accepts no liability
for loss or damage that occurs as a result of
use other than intended or incorrect use�
z Specifications supplied
1 LED outdoor spotlight with motion sensor
1 wall bracket (for mounting on building
walls or corners) inc. fixings (4 wall plugs,
2 screws (10mm), 4 screws (25mm))
1 instruction manual
z Description of parts
LED module
1
Motion and twilight sensor
2
LUX control
3
(for setting sensitivity of twilight sensor)
TIME control
4
(for setting the illumination time)
SENS control
5
(for setting the detection range)
Terminal strip
6
Strain relief clamp
7
Household mains live conductor L
8
Household mains protective earth
9
conductor PE (green/yellow)
Household mains neutral conductor N
10
Gland nut
11
Cover plate
12
Always On/Automatic mode switch
13
Screw (cover plate)
14
Cable grommet
15
8
GB
Wall bracket
16
Guide holes for fixing screws (when
17
mounting on straight walls)
Guide holes for fixing screws (when
18
mounting on corners)
Screw (25mm)
19
Wall plugs
20
Screw (10mm)
21
z Technical data
Model number: 1002-W/1002-G
Light source: max. 24W
Power supply: 220-240 V AC,
50/60 Hz
Dimensions: approx. 190 x 230 x
200mm
Weight: approx. 0.50kg
Colour 6,500 kelvin (cold white)
temperature:
Luminous power: 1,900lm with diffusor
Beam width: 100 °
Max. projection 294cm²
area:
Colour
reproduction RA > 80
index:
Protection class: IP44
Motion detector: field of view approx.
110°, range max. 12m