Residual Risks; Package Contents - DeWalt DW739 Originalanweisungen

Residual Risks

The following risks are inherent to the use of these saws:
– injuries caused by touching the rotating parts
– injuries caused by disruption of the saw blade
These risks are most evident:
– within the range of operation
– within the range of the rotating machine parts
In spite of the application of the relevant safety regulations and the
implementation of safety devices, certain residual risks cannot be
avoided.
These are:
– Impairment of hearing.
– Risk of accidents caused by the uncovered parts of the rotating
saw blade.
– Risk of injury when changing the blade.
– Risk of squeezing fingers when opening the guards.
– Health hazards caused by breathing dust developed when sawing
wood, especially oak and beech.
The following factors are of influence to noise production:
– The material to be cut
– The support of the material
– The saw bend tension
– The type of bandsaw blade
– The feed force
– Correct adjustment and regular maintenance of the guards.
– Regular maintenance of the pulleys and the lubrication system.
Labels on tool
The following pictograms are shown on the tool:
Unplug the tool when not in use, before changing any
parts of the tools, accessories or attachments and before
servicing.
Check the direction of the blade.
Do not place your hands within this area
Carrying point.
DATE CODE POSITION (FIG. 1)
The Date Code, which also includes the year of manufacture, is printed
into the housing.
Example:
Year of Manufacture

Package Contents

The package contains:
1 Partly assembled machine
1 Table
1 Rip fence
1 Box spanner (10–13 mm)
1 Pack containing:
1 Table insert
2 Blade guide blocks 45°
2 Blade guide blocks 90°
3 Coach bolts M8 x 60
4 Hex nuts M8
2012 XX XX
9 Washers D8
2 Washers D6
1 Hex bolt M8 x 60
4 Hex bolts M8 x 20
2 Hex bolts M6 x 65
2 Knobs
2 Fence clamp pieces
1 Hex key 2.5 mm
1 Hex key 6 mm
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual prior
to operation.
Description (fi g. 1)
WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
a. On/Off switch
b. Safety key
c. Blade guard
d. Table insert
e. Hinged cover
f. Blade tension adjuster
g. Blade centring adjuster
h. Cover retention bolts
i. Table tilt locking lever
j. Fence
k. Blade guard height adjuster
l. Upper blade guard/guide assembly
m. Motor location bolt
n. Blade speed adjuster (DW739)
o. Table
p. Mounting holes
nn. Push stick locations
Fig. 2
q. Rear blade support bearing
r. Locking grub screw for (q)
s. Blade guide blocks 45°
t. Locking grub screw for (s)
u. Blade guide blocks 90°
v. Locking grub screw for (u)
OPTIONAL ACCESSORIES (FIG. 3A)
w. Legstand
Fig. 3B
x. Mitre fence
y. Cut length gauge
INTENDED USE
Your DW738 / DW739 band-saw has been designed for professional
workshop application: It performs straight, contour, mitre and bevel cuts
on a wide range of materials such as wood, plastics, ferrous and non-
ferrous metals and leather.
The nominal band length is 2.095 mm and a width between 3 and
16 mm.
WARNING! Do not use the machine for other purposes as
described.
DO NOT use under wet conditions or in presence of flammable liquids
or gases.
ENGLISH
21