Operation; Operating Buttons; Menu Structure - EuroLite LED Strobe SMD PRO 864 DMX RGB Bedienungsanleitung

OPERATION

After connecting the device to the mains it is ready for operation. The display indicates the last operating
mode. The operating modes can be selected by means of the display and the control buttons. All settings
remain stored even if the device is disconnected from the mains. The device can be operated in stand-alone
mode via the control board or in DMX-controlled mode via any commercial DMX controller.

Operating buttons

Button
MUSE
ENTER
UP
DOWN

Menu structure

Mode
DMX Address Address
Operating Mode
DMX Operation Channel
Display
Display Settings
Function
Selects the operating mode or returns to the initial screen.
Activates a value to be modified or saves a value when modifying.
Selects the next menu item or increases values when modifying.
Selects the previous menu item or decreases values when modifying.
001-512
D512
Run
Auto
Mode
Sond
Lightoff
Menubak
Ligtflh
Balance
Tool
Default
Display
Auto 0
Sp 1-99
0-30
Sound
SE 0-99
0-30
54CH
13CH
5CH
Light
1 Min
2 Min
3 Min
Light
1 Min
2 Min
3 Min
Off
On
Red 50-255
Green 50-255
Blue 50-255
White 50-255
On
Off
22/28
Function
Starting address
DMX mode
Auto programs with speed
Sound programs with sensitivity
54-channel mode
13-channel mode
5-channel mode
Display always on
Display turns off after 1 minute of
inactivity
Display turns off after 2 minutes of
inactivity
Display turns off after 3 minutes of
inactivity
Menu in the display always on
Menu jumps back of the main after 1
minute of inactivity
Menu jumps back of the main after 2
minutes of inactivity
Menu jumps back of the main ofter 3
minutes of inactivity
Display does not blink
Display blinks when no DMX is
present
White balance
Reset to factory settings
Settings are retained
00134564, Version 1.1