Introduction; Product Features - EuroLite LED Strobe SMD PRO 864 DMX RGB Bedienungsanleitung

LED Strobe SMD PRO 540 DMX RGB
DANGER! Electric shock caused by short-circuit
Be careful with your operations. With a dangerous voltage you can suffer a dangerous electric
shock when touching the wires. Never open the housing. Keep the device away from rain and
moisture.
Please read these instructions carefully before using the product. They contain important
information for the correct use of the product.
Every person involved with the installation, operation and maintenance of this device has to
- be qualified
- follow the instructions of this manual
- consider this manual to be part of the total product
- keep this manual for the entire service life of the product
- pass this manual on to every further owner or user of the product
- download the latest version of the user manual from the Internet

INTRODUCTION

Thank you for having chosen one of our products. If you follow the instructions given in this manual, we are
sure that you will enjoy this device for a long period of time.

Product features

3in1 LED effect light with RGB color mixing
• 3 effects in one device: strobe, blinder and wash light
• 864 bright SMD 5050, 0,2 W, 3in1 TCL RGB LEDs
• Subdivided into 18 segments (illumination units with 48 LEDs each) which can be controlled individually via
DMX
• Auto, sound, master/slave and DMX mode
• Built-in auto and music show programs
• Flash rate 0-20 Hz
• Stepless RGB color blend, color change, color fade, dimmer and strobe effect
• Flicker-free projection
• Addressing via control panel with LCD and four operating buttons
• 5, 13 or 54 DMX channels selectable
• Swivel mounting bracket
• P-Con terminals for power linking up to 6 units
• Switch-mode power supply for operation between 100 and 240 volts
USER MANUAL
16/28 00134564, Version 1.1