Transport; Environmental Protection - Viking MB 248 T Gebrauchsanleitung

● Clean all external parts of the machine
with care.
● Thoroughly lubricate/grease all moving
parts.
● Empty the fuel tank and carburettor
(e.g. by running empty).
● Unscrew the spark plug (see engine
instruction manual) and pour approx.
3 cm³ of engine oil into the engine via
the spark plug hole. Turn the engine
several times with the spark plug
removed (pull the recoil starter rope).
Fire hazard!
Keep the spark plug socket away
from the spark plug hole due to the
danger of ignition.
● Screw the spark plug back in (see
engine instruction manual).
● Perform an oil change (see engine
instruction manual).
● Store the machine in a dry and locked
place that is generally free of dust.
Make sure that it is out of the reach of
children.
0478 111 9820 B - EN
All manuals and user guides at all-guides.com

12. Transport

12.1 Transporting
Risk of injury!
Observe the section "For your
safety" before transporting. (
Carry the machine only with the
help of a second person. Always
wear suitable safety clothing
(safety shoes, thick gloves).
Detach the spark plug socket
before lifting or transporting.
Lifting or carrying the machine:
● Only lift or carry the machine at the
lifting point (1) and the upper
handlebar (2) or, when the upper
handlebar is folded, by the two lower
handlebar sections (3) (see illustration
A).
Transporting the machine:
Risk of injury!
Only lash the machine when it is
standing on all four wheels. In this
position the mowing blade is not
exposed and no engine oil or fuel
can escape (see illustration B).
When transporting the machine on a load
floor (trailer, car, etc.), always use suitable
fastening material of an adequate size to
prevent it from slipping. Attach ropes or
straps at the following points on the
machine:
– Front wheel, rear wheel
– Lower handlebars

13. Environmental protection

Lawn clippings should be
composted and not disposed of
in household waste.
14
The machine, its packaging and
accessories are all produced
from recyclable materials and must be
4.)
disposed of accordingly.
By disposing of materials separately, and
in an environmentally friendly manner,
valuable resources can be re-used. For
this reason, the machine should be
disposed of for recycling at the end of its
useful life. Pay particular attention to the
information in the "Disposal" section
during disposal ( 4.).
Consult your recycling centre or your
specialist dealer for information on the
proper disposal of waste products.
43