Care, Cleaning & Maintenance - SPORTSTECH EX 500 Benutzerhandbuch

CARE, CLEANING & MAINTENANCE
ATTENTION
Before cleaning, maintenance and / or repair work, the training device must be completely disconnected from
the socket. For this disconnect the power cord from the electrical socket and the training device. The power
cord may be reconnected to the exercise machine and the socket when all jobs have been fully completed and
the proper training status of the device is restored.
Cleaning
Clean your exercise equipment after each training session. Do this with a wet cloth and soap. Do not use solvents.
Regular cleaning makes a significant contribution to the preservation and longevity of your exercise machine.
Damage caused by perspiration or other liquids, are not covered at any time by the warranty.
Also pay attention during training that no liquid can enter into the training device or computer.
Maintenance
Since only sealed bearings were used in your exercise equipment, a lubrication of the bearings is not required.
Verification of the fixing material
Check at least 1x a month the tightness of bolts and nuts. Screw up this, if necessary, again.
Verification of components
Check before each training the safe seat of saddle, seat post, handlebars and pedals.
CAUTION: Never train when one or more of these components are loosely.
11