Herunterladen Inhalt Inhalt Diese Seite drucken

Installation; Preparations; Accessories; Installation Location - STIEBEL ELTRON DNM 3 Bedienung Und Installation

Hydraulisch gesteuerter mini-durchlauferhitzer
Vorschau ausblenden Andere Handbücher für DNM 3:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

INSTALLATIoN

Preparations

8.2

Accessories

Special aerator
- for DNM 3 and DNM 4
- for DNM 6
Note
Fitting the special aerator supplied provides an optimum
water jet.
Non-pressurised taps
- WSN 10 | WSN  20 Sensor tap for washbasins
- MAW Wall mounted tap for oversink installation
- MAZ Twin-lever basin tap
- MAE Mono lever basin tap
9.
Preparations
f Flush the water line thoroughly.
Water installation
No safety valve is required.
www.stiebel-eltron.com
Taps/valves
f Use suitable taps (see chapter "Appliance description /
Accessories").
10. Installation

10.1 Installation location

Install the appliance in a room free from the risk of frost and near
the draw-off tap.
Ensure that the lateral fixing screws for the cover are always ac-
cessible.
The appliance is suitable for undersink installation (water con-
nections at the top) and oversink installation (water connections
at the bottom).
DANGER Electrocution
Protection rating IP 25 is only ensured if the appliance
back panel is fitted.
f Always fit the appliance back panel.
DNM |
31

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Dnm 4Dnm 6

Inhaltsverzeichnis