STIEBEL ELTRON DNM 3 Bedienung Und Installation Seite 33

INSTALLATIoN
Installation

f Use the appliance back panel as a drilling template.
f Secure the appliance back panel to the wall with suitable
rawl plugs and screws.


f Route the power cable through the cable entry in the back
panel.
www.stiebel-eltron.com


f Hook in the appliance cover with the heater at the bottom.
f Click the heater into place using the snap fastener.
f Secure the appliance cover with the cover fixing screws.
Tap installation
Material losses
!
f When making the connections, counter the torque
on the appliance using a size 14 spanner.
f Install the tap. For this, also observe the tap operating and
installation instructions.
10.2.2 Oversink installation, non-pressurised, with non-
pressurised tap
DNM | 33