Detection Range; Setting The System - Dometic MagicWatch MWE890K Bedienungsanleitung

Detection range

8 Detection range
See fig. 0
The detection range of the parking aid is divided into three zones.
• Zone 1
This zone is the first limit range. Small objects or those with poor reflective
characteristics may not be detected here.
• Zone 2
Nearly all objects in this zone are indicated, however objects may get into the
sensors' blind spot, or not be detected at all due to their consistency or small
size.
• Stop zone (3)
If there are objects in this zone, the parking aid emits a continuous tone warning
you to stop.
Nearly all objects in this zone are indicated, however objects may get into the
sensors' blind spot or not be detected at all due to their consistency or small
size.
9

Setting the system

See fig. 0 to fig. a
A
NOTICE!
Incorrect settings can impair safe operation.
The control electronics have the following control elements:
No. in fig. a
1
2
Setting the volume
➤ Briefly press the VOL button.
The volume is switched in the order "Off – Low – High – No function –
No function – Off".
8
Description
VOL button
SENS button
MWE890K
EN