Agilent 2100 Bioanalyzer System Installations- Und Sicherheitshandbuch Seite 124

4 Installing the 2100 Bioanalyzer System
Installing the 2100 Bioanalyzer System
5 Connect the other end of the serial cable to the serial port (COM-port) of your
6 If your PC is not equipped with a serial port, use the USB/serial adapter cable
7 Ensure that the power switch located at the rear of the instrument is in off
The power input socket accepts a line voltage of 100-240 VAC ±10% with a line
NOT E
frequency of 50-60 Hz. Maximum power consumption is 60 VA. There is no
voltage selector at the rear of the instrument because the power supply has a
wide-ranging capability.
8 Plug the female end of the power cord into the power input socket of the
124
PC.
that is provided with the instrument.
position.
Agilent 2100 Bioanalyzer instrument. Plug the male end of the power cord into
the electrical outlet.