Front Fork Adjusters - Ducati MONSTER 600 2001 Anleitung- Und Instandhaltungsheft

Front fork adjusters

The front fork of 900S models has rebound and
compression damping adjusters.
This adjustment is done using the outer adjusters:
1) (fig. 17) to adjust rebound damping;
2) (fig. 17) to adjust spring preload;
3) (fig. 18) to adjust compression damping.
As you turn the adjusting screws (1 and 3), you will hear
E them click. Each click identifies a setting.
Turn the screw all the way in to set the hardest damping
(position 0). This will be your starting point.
Now turn the screw anticlockwise and listen for the
clicks that identify setting positions no. "1", "2" and so
on.
Standard factory setting is as follows:
compression: 5 clicks;
rebound: 7 clicks.
The max. setting range is 14 clicks (rebound) and 16
clicks (compression) that ensure the softest damping.
24
All manuals and user guides at all-guides.com
1
2
A
fig. 17