Add CDs/DVDs
♦
Place a CD on the shaft of the spindle
at the same time, place the spacer ring
♦
Place the second CD on the spacer ring
♦
Place the spindle
Switching the appliance on and off
Start the cleaning process
♦
Insert the power plug into a mains wall socket.
♦
180 (seconds) appears onto the display
♦
Press the SET button
180, 280, 380 or 480 seconds, depending on the degree of soiling)
appears on the display
NOTE
►
090 seconds: Recommended for light soiling and items such as spectacles.
►
180 seconds: Standard time for normal soiling.
►
280 seconds: Recommended for the first cleaning with the ultrasonic
cleaner.
►
380 seconds: Recommended for the initial cleaning when several items are
being cleaned.
►
480 seconds: Recommended for heavy soiling.
♦
After selecting a suitable time for the level of soiling, start the cleaning
process by pressing the ON button
■
During the cleaning procedure, you will hear a chirping sound.
■
The operating LED
■
The time counts down to zero on the display
switches off automatically.
♦
To check the progress, even during the cleaning process, the cleaning
process can be paused by pressing the OFF button
♦
Press the ON button
♦
After the cleaning process finishes, disconnect the appliance from the power,
open the lid
steel bath
♦
Rinse the cleaned parts thoroughly with clean water before drying them with
a soft and dry cloth.
SUR 48 C4
carefully into the stainless steel bath
repeatedly until the desired cleaning time (090,
3
.
lights up during the cleaning process.
5
to resume the process.
2
and carefully remove the respective item from the stainless
6
.
7
. If you want to clean two CDs
on the CD and the shaft.
.
7
.
.
2
and then the appliance
.
4
GB │ IE
.
│
11
■