3
Software Installation
Before you start the installation:
•
Check that you have administrator rights for your computer.
•
Check that you have a unique IP address for each Fieldgate to be installed together with
subnet, gateway (LAN/router/firewall) and, if appropriate, broadcast IP addresses.
3.1
Preparing for installation
Checking the system requirements
1. Place the Fieldgate CD-ROM in your CD-ROM drive, the Setup menu appears.
2. First check that your computer fulfils the minimum requirements as described below,
see also Section 1.3.
3. Now carefully read the "Release Notes" before starting the installation - a double-
click opens them up.
5