3.3
Installing FXA720 PROFIBUS Driver
FXA720 PROFIBUS Driver must be installed only if Fieldgate FXA720 is to be used in pass-
through mode to allow a host application, e.g. P View, to access a PROFIBUS DP network.
Warning!
•
Do not install this driver if a Fieldgate PROFIBUS driver has already been
installed with the Host application, e.g. in connection with FieldCare.
Overwriting the original will cause the application to malfunction. You will be
warned during installation, if a driver already exists.
Installing the driver
1. Place the Fieldgate CD-ROM in your CD-ROM drive, the Setup menu appears.
2. Click on "Component Installation" to start the software installation process.
3. Click on "FXA720 PROFIBUS Driver" to start installion.
10