Automatic Reference Optimization - KERN CFS-Serie Betriebsanleitung

8.3 Automatic reference optimization

If at the reference determination the placed weight or the placed piece number is
too small, in the display of the average piece weight the triangle symbol will appear
[ ] [ ]
over or .
To optimize the calculated average piece weight automatically, add further parts
whose number is smaller than that of the first reference determination. After the
reference optimization sounds a signal tone. For each reference optimization the
average piece weight is newly calculated. As the additional pieces increase the
base for the calculation, the reference also becomes more exact.
Pressing or (models CFS 50K-3), recalculation can be prevented and the
reference weight can thus be blocked.
Automatic reference optimization will be deactivated as soon as the number of
added parts exceeds the saved reference quantity.
Some models allow this feature on or off in the menu.
CFS/CCS-BA-e-1523 33