Parts Counting - KERN CFS-Serie Betriebsanleitung

8 Parts counting

Before the balance can count parts, it must know the average part weight (i.e.
reference). Proceed by putting on a certain number of the parts to be counted. The
balance determines the total weight and divides it by the number of parts, the so-
called reference quantity. Counting is then carried out on the basis of the calculated
average piece weight.
As a rule:
The higher the reference quantity the higher the counting exactness.
 The average piece weight can only be determined by stable weighing
values.
 If weighing values are under zero, the piece counter display shows a
negative number of items.
 The precision of the average unit weight can be increased at any time
while units are being counter by inputting the displayed number of units
and confirming by
optimization sounds a signal tone. As the additional pieces increase the
base for the calculation, the reference also becomes more exact.
CFS/CCS-BA-e-1523
or (in CFS 50K-3 models). After the reference
27