Installing Cables And Connectors - Mettler Toledo IND570 Installationsanleitung

5. The hardware to mount the terminal to the vertical surface is not included with the terminal—it
2.4.

Installing Cables and Connectors

Information for installing cables and connectors for the IND570 terminal is provided in this section,
including: ferrites, harsh enclosure cable glands, main board wiring connections and wiring
connections for options.
30205319 | 04 | 08/2016
Figure 2-16: VESA 100 x 100mm Wall Bracket Mounting Hole Pattern (In IND570 terminals
Figure 2-17: Original Wall Bracket Mounting Hole Pattern (In IND570 terminals manufactured up to
must be supplied locally. Ensure that the mounting hardware is capable of supporting the
weight of the terminal, which is approximately 3.5 kg (8 lb). Using the locally supplied
hardware, mount the terminal to the vertical surface.
METTLER TOLEDO IND570 Weighing Terminal Installation Manual
manufactured after April, 2016)
April, 2016)
2-11