Operation; Care And Maintenance; Ordering Replacement Parts - EINHELL BG-HR 20 Set Montageanleitung

Anleitung BG_HR_20_Set_SPK7:_
GB
1. Assembly (Fig. 2-4e)
Proceed in the order of the pictures.

2. Operation

The hose between the water tap and the hose cart
can be connected to the straight connector (Fig. 5a).
Important: Turn off the tap when not in use.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

3. Care and maintenance

Check the hose connections regularly for leaks and
signs of damage.

4. Ordering replacement parts

Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
5. Disposal
Accessories and packaging should be disposed of by
environment-friendly recycling. Plastic parts are
marked to enable properly sorted recycling.
8
07.12.2007 7:39 Uhr Seite 8
All manuals and user guides at all-guides.com