Electrical Connection; Maintenance; Notes On Waste Disposal - Salvis Vitality Pro SDS 1/1-13 Installations- Und Gebrauchsanweisung

en
11.4

Electrical connection

D The electrical connection must be made by a qualified electrician-
− according to the current VDE 0100 regulations
− and the rules of the power supply company concerned.
D The flexible mains connection shall comply at least with H 07 RN-F.
D An electric switch (mains switch)
− must be easily accessible and installed upstream.
− The switch must effectively disconnect the appliance at all poles from the mains.
− The contact opening must be at least 3 mm.
D For safety reasons, we recommend fitting a residual current circuit breaker (RCB) > 10 mA.
D The appliance may only be opened by an authorized customer service or an approved spe-
cialist company. The appliance must be isolated from the mains before it is opened.
D Observe the data on the type plate when making the electrical connection.
D Integrate the appliance into the equipotential bonding system. Its efficiency must be checked
in accordance with VDE 0190.
D Make sure that the earth conductor system for the in-house electrical installation is installed
according to regulations.
12.

Maintenance

D Have the appliance inspected and serviced at regular intervals. Maintenance work includes:
e.g. safety, functioning and tightness tests.
D Installation, maintenance and repair work may only be carried out by professional electri-
cians.
D The appliance may only be opened by an authorized customer service or an approved spe-
cialist company. The appliance must be isolated from the mains before it is opened.
D Use only original accessories and original replacement parts.
D We recommend agreeing a maintenance contract with the authorized customer service.
13.

Notes on waste disposal

D Remove the mains cable and the door lock from appliances that are being taken out of ser-
vice to prevent accidents.
D Old appliances are not worthless rubbish. Valuable raw materials can be recovered from
such appliances by environmentally friendly waste disposal.
D Electronic components must be disposed of as electronic waste.
68
All manuals and user guides at all-guides.com