Installation And Connection; Transport; Removing The Protective Film - Salvis Vitality Pro SDS 1/1-13 Installations- Und Gebrauchsanweisung

11.

Installation and connection

D Follow the local technical regulations for kitchens.
D Installation work must be carried out in accordance with the manufacturer's assembly in-
structions and in accordance with accepted technical regulations.
D No other appliances may be placed on the appliance.
D Let the authorized customer service set up and install the appliance and provide instruction.
D The appliance may only be connected by the authorized customer service or an approved
specialist company.

Transport

D When transporting by hand: Be aware of the weight of the appliance and wear protective
gloves.
D When using a truck or fork-lift, take care not to damage the appliance, e.g. on its water inlet
and outlet.

Removing the protective film

. Remove protective film from the appliance. Remove residual adhesive with white spirit.
Installation
D Minimum distances
− 50 mm to the left and right,
− 20 mm to the rear.
D Do not set the appliance up adjacent to or on sources of heat.
D No moisture shall be allowed to get into the inside of the appliance.
D It must be possible to open the door fully at the proposed site so that the food can be put in
the appliance without problems.
D Do not set the appliance up on tables or base frames that are too high. The operating per-
sonnel must be able to see into the containers in the cooking compartment.
. Level the base frame or table before placing the appliance on it.
. Set the appliance up level. Compensate any unevenness with the adjustable feet.
D The appliance must be completely closed while the feet are being adjusted as the housing
panels have a supporting function.
. Secure the appliance against falling or shifting.
All manuals and user guides at all-guides.com
en
65