Cooking With Programmes And Functions; Starting The Programme - Salvis Vitality Pro SDS 1/1-13 Installations- Und Gebrauchsanweisung

3.6

Cooking with programmes and functions

Some 80 programmes have been assigned and saved in the factory. You will find the pro-
gramme numbers in the cookbook and the recipes.
Setting a programme after switching on
. Press the programme key
D The indicator light in the key flashes.
D The programme last set, e.g.
. Press the programme key
played.
D The indicator light in the key
. Enter the programme number using the numeric keys, e.g.
. If you wish to have the data relating to the programme displayed immediately, press the
entry confirmation key
D The data for this programme will be displayed in the display fields.

Starting the programme

. Press the Start/Stop key
D Display of the cooking process:
− The Start/Stop key lights up and
− the cooking time runs down once the cooking compartment temperature is almost rea-
ched (AQA − automatic quantity adjustment).
D If the cooking time display
door has not been opened following a cooking process − open and close the cooking com-
partment door.
D Cooking data can be modified and displayed during the cooking process, see page 50 sec-
tion 3.7
All manuals and user guides at all-guides.com
.
, will be displayed.
again if you wish to change the programme number dis-
and the display flash.
flashes, it means that the cooking compartment
en
49