Kinderkraft XPEDITION Bedienungsanleitung Seite 59

grasp the integrated seat base and thus tighten the ISOFIX attachments with left-right
movement (Fig. A.10.3). By doing this you make sure that the car seat for a child is securely
fastened (Fig. A.10.4).
• Grasp the car seat and check that it is securely fastened with no slack. If it moves and the
ISOFIX attachments do not extend, repeat the previous steps, check that both ISOFIX
indicators are completely green.
• Put the child in the child safety seat, carry the car seat in front of the child. Fasten the car
belt in the buckle, you will hear a distinctive „click".
• Carry the shoulder belt through the guide (7) under the headrest (fig. A.13).
• The hip belt must be placed in child safety seat guides which are marked with red color on
both sides of the seat (14) (fig. A.13).
• Adjust the headrest to the child's height (see point 4.1).
• Tighten the car seat belt. At first pull the hip belt section and then shoulder belt section.
Make sure the hip belt goes as low as possible above child's hips, fits guide and is secured
with a buckle. The shoulder belt must go between child's arm and neck. Make sure the belt
does not pinch the child's neck.
5.4 How to install the child safety seat in a forward-facing position for children from ll/lll
weight groups (15 kg-36 kg) with the use of 3-point car seat belts.
IMPORTANT! The car manual shows location of fixing points and other important information
on installation of the child safety seat in the car. The user MUST read the car manual.
• To adapt the child safety seat to weight group II/III (15-36kg), before installation hide 5-
point safety belts of the safety seat, follow the point 6.0.
• Place the child safety seat on the car seat, near the backrest.
• Set the child safety seat in a forward-facing position. Press the seat rotation lever (12) (fig.
A.6) to rotate the child safety seat in a forward-facing position (fig. A.7.1). The correctly
secured position is indicated by the green color by the seat rotation lever (12).
• After completing operations related to child safety seat direction, set the child safety seat
backrest inclination. To do so, hold the seat inclination lever (11) (fig. A.8), the child safety
seat can be set in any position from „1" to „4" (fig. A.9.1).
• Put the child in the child safety seat, carry the car belt in front of the child. Fasten the car
seat belt in the buckle until you can hear a distinctive „click".
• Carry the shoulder belt through the guide (8) under the headrest (fig. A.13).
• The hip belt must be placed in the child safety seat guides which are marked in red on both
sides of the seat (14); (fig. A.13).
• Adjust the headrest to child's height (see point 4.1).
• Tighten the car seat belt. At first pull the hip belt section and then shoulder belt section.
Make sure the hip belt goes as low as possible above the child's hips, fits guide and is secured
with a buckle. The shoulder belt must go between the child's arm and neck. Make sure the
belt does not pinch the child's neck.
59