Solving Problems - Gastroback Design Fleischwolf Plus Bedienungsanleitung

and cookie former (see: ›Assembling for making cookies‹).
3. Place the pastry on the tray of the mincer.
4. Insert the plug of the mincer in the power outlet, switch ON the appliance (power
switch and ON/OFF button), and then use the pusher to gently push the pastry
into the feed tube.
5. After processing your pastry, switch OFF the appliance (ON/OFF switch and
power switch). Then unplug the appliance.
6. Clean the appliance according to the instructions in section Care and Cleaning.
Always clean the appliance immediately after operation. Do not leave any food
dry on the appliance.
7. Bake the cookies according to your recipe.

SOLVING PROBLEMS

If any problems occur during operation, you will find solutions in the following table.
Additionally, you can contact your vendor.
Problem
The motor does not work,
the indicators are dark.
The motor does not work,
the buttons are illumina-
ted.
The reverse
does not work. The ON/
OFF button is illuminated
blue.
54
All manuals and user guides at all-guides.com
Possible Cause
The appliance is not live.
The power switch is
switched OFF.
The circuit breaker is
activated.
The overheat protection
switched off the appliance.
The cutter housing is blo-
cked.
operation You cannot start reverse ope-
ration, while forward opera-
tion is switched on.
Solution
Insert the power plug in the
power outlet.
Switch on the power switch.
Press the red button at the
bottom of the appliance.
Let the motor cool down (See:
›Overheat protection‹).
Switch to reverse operation for
a moment (See: ›Clearing a
blocking – reverse operation‹)
Switch off the ON/OFF but-
ton. This button must be illumi-
nated white to activate reverse
operation. Try again.