Invacare Kompas Gebrauchsanweisung Seite 15

1). Ensure that you receive the battery box,
and controller.
2). Open the power wheelchair.
3). Pull out the spring pin button. Ensure the
pin out from the holder.
4). Insert the battery box into the holder.
5). Loosen the pin button. Lock the battery.
6). Insert the controller into the fixing clamp
and adjust it in a convenient position.
7). Screw the knob to lock the controller.
8). The connection wire of the controller is fixed
in the way shown in (1-3) : the front end of
the connection wire is stuck into the wire buckle,
the middle of the connection wire is fixed at the
end of the armrest pipe with a wire harness,
and the end of the connection wire is inserted
into the back cushion.
9). Plug in the controller connector to the lower
connector, as shown in (1-3), and hide it in
the back cushion.